Datasheet

INA138, INA168
2
SBOS122C
www.ti.com
Supply Voltage, V+
INA138 ............................................................................... –0.3V to 60V
INA168 ............................................................................... –0.3V to 75V
Analog Inputs, V
IN+
, V
IN–
INA138
Common Mode
(2)
............................................................ –0.3V to 60V
Differential (V
IN+
) – (V
IN–
) .................................................. –40V to 2V
INA168
Common Mode
(2)
............................................................ –0.3V to 75V
Differential (V
IN+
) – (V
IN–
) .................................................. –40V to 2V
Analog Output, Out
(2)
........................................................... –0.3V to 40V
Input Current Into Any Pin ............................................................... 10mA
Operating Temperature ..................................................–55°C to +150°C
Storage Temperature ..................................................... –65°C to +150°C
Junction Temperature .................................................................... +150°C
NOTE: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may degrade
device reliability. These are stress ratings only, and functional operation of the
device at these or any other conditions beyond those specified is not implied.
(2) The input voltage at any pin may exceed the voltage shown if the current
at that pin is limited to 10mA.
ABSOLUTE MAXIMUM RATINGS
(1)
SPECIFIED
PACKAGE TEMPERATURE PACKAGE ORDERING TRANSPORT
PRODUCT PACKAGE-LEAD DESIGNATOR RANGE MARKING NUMBER MEDIA, QUANTITY
INA138 SOT23-5 Surface-Mount DBV –40°C to +125°C B38 INA138NA/250 Tape and Reel, 250
"" """INA138NA/3K Tape and Reel, 3000
INA168 SOT23-5 Surface-Mount DBV –40°C to +125°C A68 INA168NA/250 Tape and Reel, 250
"" """INA168NA/3K Tape and Reel, 3000
NOTE: (1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI website at
www.ti.com.
PACKAGE/ORDERING INFORMATION
(1)
PIN CONFIGURATION
Top View SOT23
OUT
GND
V
IN+
V+
V
IN–
1
2
3
5
4
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Texas Instru-
ments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
ESD damage can range from subtle performance degrada-
tion to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.