Datasheet

3
®
INA122
PIN CONFIGURATION
Top View 8-Pin DIP, SO-8
Supply Voltage, V+ to V– .................................................................... 36V
Signal Input Terminals, Voltage
(2)
....................... (V–)–0.3V to (V+)+0.3V
Current
(2)
...................................................... 5mA
Output Short Circuit ................................................................. Continuous
Operating Temperature ................................................. –40°C to +125°C
Storage Temperature..................................................... –55°C to +125°C
Lead Temperature (soldering, 10s) ............................................... +300°C
NOTES: (1) Stresses above these ratings may cause permanent damage.
(2) Input terminals are internally diode-clamped to the power supply rails.
Input signals that can exceed the supply rails by more than 0.3V should be
current-limited to 5mA or less.
ABSOLUTE MAXIMUM RATINGS
(1)
PACKAGE INFORMATION
PACKAGE DRAWING
PRODUCT PACKAGE NUMBER
(1)
INA122PA 8-Pin DIP 006
INA122P 8-Pin DIP 006
INA122UA SO-8 Surface Mount 182
INA122U SO-8 Surface Mount 182
NOTE: (1) For detailed drawing and dimension table, see end of data sheet, or
Appendix C of Burr-Brown IC Data Book.
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Burr-Brown
recommends that all integrated circuits be handled with ap-
propriate precautions. Failure to observe proper handling and
installation procedures can cause damage.
ESD damage can range from subtle performance degradation
to complete device failure. Precision integrated circuits may
be more susceptible to damage because very small parametric
changes could cause the device not to meet its published
specifications.
R
G
V
IN
V
IN
V–
R
G
V+
V
O
Ref
1
2
3
4
8
7
6
5
–
+