Datasheet

FPD-Link Evaluation Kit User’s Manual
National Semiconductor Corporation
Rev 3.0
Date: 9/25/2007
Page 8 of 25
Jumper Settings for the Tx Board
Jumper Purpose Settings
R_FB Rising or Falling = Rising = Falling
(JP1) Data Strobe Vcc GND Vcc GND
Default setting is JP1 set LOW (to GND), falling edge strobe.
/PD PowerDown = ON = OFF
(JP2)
Vcc GND Vcc GND
(ON: Tx is operational; OFF: Tx powers down)
Default setting is JP2 set HIGH (to Vcc), operational mode.