Datasheet

1. Kit Contents, eZ430-F2013

• One eZ430-F2013. The hardware is housed inside a plastic

enclosure that may be opened in order to separate the MSP-EZ430D

target board from the MSP-EZ430U debugging interface.

• One MSP430 Development Tool CD-ROM which contains several

documents including the following related to the eZ430-F2013:

• MSP430x2xx Family User’s Guide, SLAU144A

• MSP-FET430 FLASH Emulation Tool User’s Guide, SLAU138C

• MSP-FET430 FLASH Emulation Tool User's Guide Errata,

SLAZ027

• eZ430-F2013 User’s Guide (this document)

• IAR Embedded Workbench (Kickstart Version)

2. eZ430-F2013 Overview

The eZ430-F2013 is a complete MSP430 development tool providing all

the hardware and software to evaluate the MSP430F2013 and complete

an entire project in a convenient USB stick form factor. The eZ430-

F2013 uses the IAR Embedded Workbench Integrated Development

Environment (IDE) to provide full emulation with the option of designing a

stand-alone system or detaching the removable target board to integrate

into an existing design. The USB port provides power to operate the

ultra-low-power MSP430 so no external power supply is required.

All 14-pins on the MSP430F2013 are accessible on the MSP-EZ430D

target board for easy debugging and interfacing with peripherals.

Additionally, one of the digital I/O pins is connected to an LED for visual

feedback. The MSP430F2013 includes 16-MIPS performance, a 16-bit

Sigma Delta Analog-to-Digital converter, a 16-bit timer, Watchdog timer,

brownout detector, a USI module supporting SPI and I

C, and five low

power modes drawing as little as 0.1 µA standby.

Figure 1. eZ430-F2013 Development Tool

Spy Bi-Wire Fully accessible

Interface MSP430 pins

LED

MSP430F2013

MSP-EZ430U Debugging Interface

Detachable MSP-EZ430D

Target Board