Operation Manual

www.ti.com

eZ430-Chronos Sports Watch Software

3.2.1 Detailed Feature Overview - Modes Using the Top LCD Line

3.2.1.1 Time Mode

Press "*" until the time mode is active (see Figure 3-1 for details).

Secondary function: Seconds. Press "UP" to activate the alternative display. To return to the HH:MM

mode, push the "UP" button again.

Set function: Setting the time.

1. Hold "*" for three seconds until the time disappears and "12H" or "24H" is shown on the LCD

2. Select 12H/24H modes by pushing the "UP" or "DOWN" buttons

3. Press "#" to continue with the time adjustment

4. Set the hours by pushing the "UP" or "DOWN" button

5. Press "#" to continue with the minutes adjustment

6. Set the minutes by pushing the "UP" or "DOWN" button

7. Press "#" to continue with the second adjustment

8. Set the seconds by pushing the "UP" or "DOWN" button

9. Press "*" to confirm the settings and go back to normal operation, or press "#" to start over with step 2

NOTE: If no button is pressed for more than 30 seconds, the previous settings are restored.

3.2.1.2 Alarm Mode

Press "*" until the alarm mode is active (see Figure 3-1 for details). The alarm mode can be distinguished

from time mode by an alarm symbol (bell) that flashes when the alarm time is displayed.

Secondary function: Alarm on/off. Press "UP" to enable or disable the alarm. The settings are confirmed

by "on" and "off" in the top LCD line. The bell icon stays on in all other modes when the alarm is enabled

and does not appear when the alarm is disabled.

Set function: Setting the alarm time.

1. Hold "*" for three seconds until the alarm time hour starts to flash

2. Set the hours by pushing the "UP" or "DOWN" button

3. Press "#" to continue with the minutes adjustment

4. Set the minutes by pushing the "UP" or "DOWN" button

5. Press "*" to confirm the settings and go back to normal operation, or press "#" to start over with step 2

NOTE: If no button is pressed for more than 30 seconds, the previous settings are restored.

SLAU292D–November 2009–Revised March 2011 eZ430-Chronos Software

Submit Documentation Feedback