Operation Manual

Using the eZ430-Chronos Watch Stand Alone

www.ti.com

NOTE: If no button is pushed for more than 30 seconds, the previous settings are restored.

Alternatively, the time and date may be set wirelessly using the eZ430-Chronos Control

Center (see Section 3.3.3).

2.1.2 Setting the Date

1. Push the "#" button until the date is displayed in the bottom LCD line.

2. Hold "#" for three seconds until the year flashes on the bottom LCD line.

3. Set the year by pushing the "UP" or "DOWN" button.

4. Press "#" to continue with the month adjustment.

5. Set the month by pushing the "UP" or "DOWN" button.

6. Press "#" to continue with the day adjustment.

7. Set the day by pushing the "UP" or "DOWN" button.

8. Press "*" to confirm the settings and go back to normal operation, or press "#" to start over with step 3.

NOTE: If no button is pushed for more than 30 seconds, the previous settings are restored.

Getting Started SLAU292D–November 2009–Revised March 2011

Submit Documentation Feedback