Datasheet

Register 19: SHA Length (SHA_LENGTH), offset 0x048
WRITE: Block Length/Remaining Byte Count (bytes) READ: Remaining Byte Count. The value
programmed MUST be a 64-byte multiple if Close Hash is set to 0. This register is also the trigger
to start processing: once this register is written, the core will commence requesting input data via
DMA or IRQ (if programmed length > 0) and start processing. The remaining byte count for the
active operation can be read from this register when the interrupt status register indicates that the
operation is suspended due to a context switch request.
SHA Length (SHA_LENGTH)
Base 0x4403.4000
Offset 0x048
Type RW, reset 0x0000.0000
16171819202122232425262728293031
LENGTH
RWRWRWRWRWRWRWRWRWRWRWRWRWRWRWRWType
0000000000000000Reset
0123456789101112131415
LENGTH
RWRWRWRWRWRWRWRWRWRWRWRWRWRWRWRWType
0000000000000000Reset
DescriptionResetTypeNameBit/Field
Block Length/Remaining Byte Count
This field is written with the block length in bytes of the data to be
processed. When read, this field contains the remaining byte count.
0x0000.0000RWLENGTH31:0
June 18, 20141066
Texas Instruments-Production Data
SHA/MD5 Accelerator