Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsDev KitsPCB design board

national.com

DS99R124Q-EVK

FPD-Link II to FPD-Link Converter

Evaluation Kit

Rev 0.0

April, 2010

General Description

The DS99R124Q-EVK converts FPD-link II to FPD-Link. It translates a high-speed serialized interface with an embedded clock

over a single pair to three LVDS data/control streams and one LVDS clock pair. It is backward compatible for operation with

older generation deserializer devices.

The DS99R124Q-EVK board has a space saving 20-position wall header as the FPD-Link output, and a Rosenberger

Automotive HSD Connector as the input. USB or SMA connectors can also be configured as the input, based on the type of

the cable to be used.

Features

• 5 – 43 MHz support (140 Mbps to 1.82 Gbps Serial Link)

• 4-channel (3 data + 1 clock) FPD-Link driver outputs

• AC Coupled STP Interconnect up to 10 meters in length

• Integrated input termination

• @ Speed link BIST Mode and reporting pin

• Optional I2C compatible Serial Control Bus

• RGB666 + VS, HS, DE converted from 1 pair

• Power down mode minimizes power dissipation

• FAST random data lock; no reference clock required

• Adjustable input receive equalization

• LOCK (real time link status) reporting pin

• Low EMI FPD-Link output

• SSCG option for lower EMI

• 1.8V or 3.3V compatible I/O interface

• Automotive grade product: AEC-Q100 Grade 2 qualified

• >8kV HBM ESD tolerance

• Backward compatible mode for operation with older generation devices

Applications

• Automotive Displays for Navigation

• Automotive Display for Entertainment

Ordering Information

PART: DS99R124QSQ

Demo board: DS99R124Q-EVK

Summary of content (8 pages)

PAGE 1
DS99R124Q-EVK FPD-Link II to FPD-Link Converter Evaluation Kit Rev 0.0 April, 2010 General Description The DS99R124Q-EVK converts FPD-link II to FPD-Link. It translates a high-speed serialized interface with an embedded clock over a single pair to three LVDS data/control streams and one LVDS clock pair. It is backward compatible for operation with older generation deserializer devices.
PAGE 2
Typical Configuration Quick Start Guide: 1. 2. 3. 4. Connect 3.3V DC power and ground of the board to the JP1 from the power supply. Connect 1.8V DC power and ground of the board to the J4 and J5 from the power supply. Attach an applicable cable (not supplied – Rosenberger cable) to this RX board (DS99R124Q) input from a TX board (DS99R421) output.
PAGE 3
Configuration Settings Component Name Function Power Connections J7 5V DC J4 1.8V DC 1.8V VDD Power. Optional 5V DC Power Jack (Not Populated) JP1 3.3V DC 3.3V VDD Power. J5 VSS Ground. JP2 VDDIO Connect to 3.3V or 1.8V. JP3 VDDA2 Always connect to 1.8V. - VDDPC Always connect to 1.8V. - VDDL Always connect to 1.8V. - VDDTXC Always connect to 3.3V.
PAGE 4
Bill of Material Item Quantity Reference Part Comments Digi-Key P/N Part Number 1 2 C3,C4 0.1uF CAP CERAMIC .1UF25V X5R 0402 445-4964-1-ND C1005X5R1E104K 2 1 C5 4.7uF PCC1731CT-ND ECJ-0EF1C104Z 3 9 C6,C18,C20,C22,C25,C26, 0.01uF CAP .1UF 16V CERAMIC Y5V 0402. CAP CERAMIC .01UF 100V X7R 0603 399-3189-1-ND C0603C103K1RACTU 0.1uF CAP .
PAGE 8
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.