Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - drivers LVDS, P2MP 4/0 SOIC 16 N

Line Card in SLOT 1

BACKPLANE

DS91M047

Line Card in SLOT N-1

M-LVDS Receivers

= Z

LOADED

Line Card in SLOT N

M-LVDS Receivers

DS91M047

www.ti.com

SNLS145E –JUNE 2008–REVISED APRIL 2013

DS91M047 125 MHz Quad M-LVDS Line Driver

Check for Samples: DS91M047

FEATURES

DESCRIPTION

The DS91M047 is a high-speed quad M-LVDS line

• DC - 125 MHz / 250 Mbps Low Jitter, Low

driver designed for driving clock or data signals to up

Skew, Low Power Operation

to four multipoint networks.

• Conforms to TIA/EIA-899 M-LVDS Standard

M-LVDS (Multipoint LVDS) is a new family of bus

• Controlled Transition Times (2 ns typ)

interface devices based on LVDS technology

Minimize Reflections

specifically designed for multipoint and multidrop

• 8 kV ESD on M-LVDS Pins Protects Adjoining

cable and backplane applications. It differs from

Components

standard LVDS in providing increased drive current to

handle double terminations that are required in multi-

• Flow-Through Pinout Simplifies PCB Layout

point applications. Controlled transition times

• Industrial Operating Temperature Range

minimize reflections that are common in multipoint

(−40°C to +85°C)

configurations due to unterminated stubs.

• Available in a Space Saving SOIC-16 Package

The DS91M047 accepts LVTTL/LVCMOS input levels

and translates them to M-LVDS signal levels with

APPLICATIONS

transition times of greater than 1 ns. The device

provides the DE and DE inputs that are ANDed

• Multidrop / Multipoint Clock and Data

together and control the TRI-STATE outputs. The DE

Distribution

and DE inputs are common to all four drivers.

• High-Speed, Low Power, Short-Reach

Alternative to TIA/EIA-485/422

The DS91M047 has a flow-through pinout for easy

PCB layout. The DS91M047 provides a new

• Clock Distribution in AdvancedTCA (ATCA)

alternative for high speed multipoint interface

and MicroTCA (μTCA, uTCA) Backplanes

applications. It is packaged in a space saving SOIC-

16 package.

TYPICAL APPLICATION

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2All trademarks are the property of their respective owners.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (16 pages)

PAGE 1
DS91M047 www.ti.com SNLS145E – JUNE 2008 – REVISED APRIL 2013 DS91M047 125 MHz Quad M-LVDS Line Driver Check for Samples: DS91M047 FEATURES DESCRIPTION • The DS91M047 is a high-speed quad M-LVDS line driver designed for driving clock or data signals to up to four multipoint networks.
PAGE 2
DS91M047 SNLS145E – JUNE 2008 – REVISED APRIL 2013 www.ti.com Connection Diagrams DE 1 16 B0 DI0 2 15 A0 DI1 3 14 A1 VDD 4 13 B1 GND 5 12 B2 DI2 6 11 A2 DI3 7 10 A3 DE 8 9 B3 DE DE B0 DI0 A0 B1 DI1 A1 B2 DI2 A2 B3 DI3 A3 PIN DESCRIPTIONS Pin No. Name 2, 3, 6, 7 DI Driver input pin, LVCMOS compatible. Description 10, 11, 14, 15 A Non-inverting driver output pin, M-LVDS levels. 9, 12, 13, 16 B Inverting driver output pin, M-LVDS levels.
PAGE 3
DS91M047 www.ti.com SNLS145E – JUNE 2008 – REVISED APRIL 2013 These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. ABSOLUTE MAXIMUM RATINGS (1) (2) −0.3V to +4V Power Supply Voltage −0.3V to (VDD + 0.3V) LVCMOS Input Voltage −1.9V to +5.
PAGE 4
DS91M047 SNLS145E – JUNE 2008 – REVISED APRIL 2013 www.ti.com DC ELECTRICAL CHARACTERISTICS (1) (2) (3) (4) Over supply voltage and operating temperature ranges, unless otherwise specified. Symbol Parameter Conditions Min Typ Max Units V LVCMOS DC Specifications VIH High-Level Input Voltage 2.0 VDD VIL Low-Level Input Voltage GND 0.8 V IIH High-Level Input Current VIH = 3.
PAGE 5
DS91M047 www.ti.com SNLS145E – JUNE 2008 – REVISED APRIL 2013 DC ELECTRICAL CHARACTERISTICS(1)(2)(3)(4) (continued) Over supply voltage and operating temperature ranges, unless otherwise specified.
PAGE 6
DS91M047 SNLS145E – JUNE 2008 – REVISED APRIL 2013 www.ti.com PARAMETER MEASUREMENT INFORMATION Figure 1. Differential Driver Test Circuit A ~ 1.9V B ~ 1.3V 'VOS(SS) VOS VOS(PP) Figure 2. Differential Driver Waveforms Figure 3.
PAGE 7
DS91M047 www.ti.com SNLS145E – JUNE 2008 – REVISED APRIL 2013 PARAMETER MEASUREMENT INFORMATION (continued) Figure 4. Differential Driver DC Open Test Circuit Figure 5. Differential Driver Short-Circuit Test Circuit Figure 6.
PAGE 8
DS91M047 SNLS145E – JUNE 2008 – REVISED APRIL 2013 www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) Figure 7. Driver Propagation Delay and Transition Time Waveforms Figure 8.
PAGE 9
DS91M047 www.ti.com SNLS145E – JUNE 2008 – REVISED APRIL 2013 PARAMETER MEASUREMENT INFORMATION (continued) Figure 9.
PAGE 10
DS91M047 SNLS145E – JUNE 2008 – REVISED APRIL 2013 www.ti.com TYPICAL PERFORMANCE CHARACTERISTICS 2.8 2.8 f = 125 MHz DRIVER FALL TIME (10-90%) (ns) DRIVER RISE TIME (10-90%) (ns) f = 125 MHz VCC = 3.0V 2.5 2.2 1.9 VCC = 3.6V 1.6 VCC = 3.3V 1.3 1.0 -50 -10 30 70 110 VCC = 3.0V 2.5 2.2 1.9 VCC = 3.6V 1.6 VCC = 3.3V 1.3 1.0 -50 150 -10 TEMPERATURE (°C) 750 600 450 f = 1 MHz VCC = 3.3V TA = 25°C 0 0 25 50 75 100 125 f = 125 MHz VCC = 3.0V 4.0 3.5 3.0 VCC = 3.6V 2.5 VCC = 3.3V 2.
PAGE 11
DS91M047 www.ti.com SNLS145E – JUNE 2008 – REVISED APRIL 2013 REVISION HISTORY Changes from Revision D (April 2013) to Revision E • Page Changed layout of National Data Sheet to TI format ..........................................................................................................
PAGE 12
PACKAGE OPTION ADDENDUM www.ti.
PAGE 13
PACKAGE MATERIALS INFORMATION www.ti.com 24-Apr-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device DS91M047TMAX/NOPB Package Package Pins Type Drawing SOIC D 16 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 2500 330.0 16.4 Pack Materials-Page 1 6.5 B0 (mm) K0 (mm) P1 (mm) 10.3 2.3 8.0 W Pin1 (mm) Quadrant 16.
PAGE 14
PACKAGE MATERIALS INFORMATION www.ti.com 24-Apr-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) DS91M047TMAX/NOPB SOIC D 16 2500 367.0 367.0 35.
PAGE 15
PAGE 16
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.