Datasheet

DS90UH926Q
SNLS337J OCTOBER 2010REVISED APRIL 2013
www.ti.com
Table 9. Serial Control Bus Registers (continued)
ADD ADD Register Bit(s) Register Default Function Descriptions
(dec) (hex) Name Type (hex)
227 0xE3 RPTR TX3 7:1 R 0x00 HDCP Serializer Port 3 I2C Address: Indicates the I2C address
Serializer for the Repeater Serializer Port.
Port 3
0 R Serializer Port 3 Valid: Indicates that the HDCP Repeater
Address
has a Serializer port at the I2C Address identified by upper
7 bits of this register
240 0xF0 HDCP RX ID 7:0 R 0x5F ID0 First byte ID code: ‘_’
241 0xF1 7:0 R 0x55 ID1 Second byte of ID code: ‘U’
242 0xF2 7:0 R 0x48 ID2 Third byte of ID code, Value will be either ‘B’ or ‘H’. ‘H’
indicates an HDCP capable device.
243 0xF3 7:0 R 0x39 ID3 Fourth byte of ID code: ‘9’
244 0xF4 7:0 R 0x32 ID4 Fifth byte of ID code: '2'
245 0xF5 7:0 R 0x36 ID5 Sixth byte of ID code: '6'
42 Submit Documentation Feedback Copyright © 2010–2013, Texas Instruments Incorporated
Product Folder Links: DS90UH926Q