Datasheet

DS90UH926Q
SNLS337J OCTOBER 2010REVISED APRIL 2013
www.ti.com
Table 9. Serial Control Bus Registers (continued)
ADD ADD Register Bit(s) Register Default Function Descriptions
(dec) (hex) Name Type (hex)
10 0x0A SlaveID[2] 7:1 RW 0x00 Target 7-bit Remote Slave Device ID 2
Slave Configures the physical I2C address of the remote I2C
Device ID2 Slave device attached to the remote Serializer. If an I2C
transaction is addressed to the Slave Alias ID2, the
transaction will be remapped to this address before
passing the transaction across the Bidirectional Control
Channel to the Serializer.
0 Reserved
11 0x0B SlaveID[3] 7:1 RW 0x00 Target 7-bit Remote Slave Device ID 3
Slave Configures the physical I2C address of the remote I2C
Device ID3 Slave device attached to the remote Serializer. If an I2C
transaction is addressed to the Slave Alias ID3, the
transaction will be remapped to this address before
passing the transaction across the Bidirectional Control
Channel to the Serializer.
0 Reserved
12 0x0C SlaveID[4] 7:1 RW 0x00 Target 7-bit Remote Slave Device ID 4
Slave Configures the physical I2C address of the remote I2C
Device ID4 Slave device attached to the remote Serializer. If an I2C
transaction is addressed to the Slave Alias ID4, the
transaction will be remapped to this address before
passing the transaction across the Bidirectional Control
Channel to the Serializer.
0 Reserved
13 0x0D SlaveID[5] 7:1 RW 0x00 Target 7-bit Remote Slave Device ID 5
Slave Configures the physical I2C address of the remote I2C
Device ID5 Slave device attached to the remote Serializer. If an I2C
transaction is addressed to the Slave Alias ID5, the
transaction will be remapped to this address before
passing the transaction across the Bidirectional Control
Channel to the Serializer.
0 Reserved
14 0x0E SlaveID[6] 7:1 RW 0x00 Target 7-bit Remote Slave Device ID 6
Slave Configures the physical I2C address of the remote I2C
Device ID6 Slave device attached to the remote Serializer. If an I2C
transaction is addressed to the Slave Alias ID6, the
transaction will be remapped to this address before
passing the transaction across the Bidirectional Control
Channel to the Serializer.
0 Reserved
15 0x0F SlaveID[7] 7:1 RW 0x00 Target 7-bit Remote Slave Device ID 7
Slave Configures the physical I2C address of the remote I2C
Device ID7 Slave device attached to the remote Serializer. If an I2C
transaction is addressed to the Slave Alias ID7, the
transaction will be remapped to this address before
passing the transaction across the Bidirectional Control
Channel to the Serializer.
0 Reserved
16 0x10 SlaveAlias[0] 7:1 RW 0x00 ID[0] Match 7-bit Remote Slave Device Alias ID 0
Configures the decoder for detecting transactions
designated for an I2C Slave device attached to the remote
Serializer. The transaction will be remapped to the address
specified in the Slave ID0 register.
A value of 0 in this field disables access to the remote I2C
Slave.
0 Reserved
32 Submit Documentation Feedback Copyright © 2010–2013, Texas Instruments Incorporated
Product Folder Links: DS90UH926Q