Datasheet

www.ti.com
14 DS90UH926QSEVB User’s Guide Sept 2012
3.3.6. Trouble Shooting ALP Software
If the following window opens after starting the ALP software, double check the
hardware setup.
Analog LaunchPAD No Devices Error
It may also be that the USB driver is not installed. Check the device manager.
There should be an “NSC ALP Nano Atmel” device under the “Universal Serial
Bus Controllers” as shown below.
Windows XP, Analog LaunchPAD USB Driver
The software should start with only “DS90UH926Q” in the “Devices” pull down
menu. If there are more devices then the software is most likely in demo mode.
When the ALP is operating in demo mode there is a “(Demo Mode)” indication in
the lower left of the application status bar as shown below.