Datasheet

Draft

Usage

www.ti.com

4.3 Usage

Startup

Make sure all the software has been installed and the hardware is powered on and connected to the PC.

Execute “Analog LaunchPAD” from the start menu. The default start menu location is “Programs\National

Semiconductor Corp\Analog LaunchPAD vx.x.x\Analog LaunchPAD”.

The application should come up in the state shown below. If it does not, see “Trouble Shooting” at the end

of this document. Under the Devices tab click on “DS90UH92x” to select the device and open up the

device profile and its associated tabs.

Figure 4-1. ALP Startup Screen

ALP Software SNLU125–November 2012

Submit Documentation Feedback