Datasheet

www.ti.com
Sept 2012 Literature Number: SNLU114 13
Any RW Type register, , can be written into by writing the hex value into the “Value:” box,
or putting the pointer into the individual register bit(s) box by a left mouse click to put a
check mark (indicating a “1”) or unchecking to remove the check mark (indicating a “0”). Click the
“Apply” button to write to the register, and “refresh” to see the new value of the selected
(highlighted) register.
The box toggles on every mouse click.
Scripting Tab
The Scripting tab is shown below. Usage is not described in this document.