Datasheet

DS90UB913Q, DS90UB914Q
www.ti.com SNLS420B –JULY 2012–REVISED APRIL 2013
Table 2. DS90UB914Q Control Registers (continued)
Addr
Name Bits Field R/W Default Description
(Hex)
7-bit Remote Slave Device ID 6 Configures the
physical I
2
C address of the remote I
2
C Slave
device attached to the remote Serializer. If an
I
2
C transaction is addressed to the Slave Alias
7:1 Slave ID6 RW 0
ID6, the transaction will be remapped to this
0x0E Slave ID[6]
address before passing the transaction across
the Bidirectional Control Channel to the
Serializer.
0 RSVD Reserved
7-bit Remote Slave Device ID 7 Configures the
physical I
2
C address of the remote I
2
C Slave
device attached to the remote Serializer. If an
I
2
C transaction is addressed to the Slave Alias
7:1 Slave ID7 RW 0x00
ID7, the transaction will be remapped to this
0x0F Slave ID[7]
address before passing the transaction across
the Bidirectional Control Channel to the
Serializer.
0 RSVD Reserved
7-bit Remote Slave Device Alias ID 0
Configures the decoder for detecting
transactions designated for an I
2
C Slave device
attached to the remote Serializer. The
7:1 Slave Alias ID0 RW 0x00
transaction will be remapped to the address
0x10 Slave Alias[0]
specified in the Slave ID0 register. A value of 0
in this field disables access to the remote I
2
C
Slave.
0 RSVD Reserved
7-bit Remote Slave Device Alias ID 1
Configures the decoder for detecting
transactions designated for an I
2
C Slave device
attached to the remote Serializer. The
7:1 Slave Alias ID1 RW 0x00
transaction will be remapped to the address
0x11 Slave Alias[1]
specified in the Slave ID1 register. A value of 0
in this field disables access to the remote I
2
C
Slave.
0 RSVD Reserved
7-bit Remote Slave Device Alias ID 2
Configures the decoder for detecting
transactions designated for an I
2
C Slave device
attached to the remote Serializer. The
7:1 Slave Alias ID2 RW 0x00
transaction will be remapped to the address
0x12 Slave Alias[2]
specified in the Slave ID2 register. A value of 0
in this field disables access to the remote I
2
C
Slave.
0 RSVD Reserved
7-bit Remote Slave Device Alias ID 3
Configures the decoder for detecting
transactions designated for an I
2
C Slave device
attached to the remote Serializer. The
7:1 Slave Alias ID3 RW 0x00
transaction will be remapped to the address
0x13 Slave Alias[3]
specified in the Slave ID3 register. A value of 0
in this field disables access to the remote I
2
C
Slave.
0 RSVD Reserved
Copyright © 2012–2013, Texas Instruments Incorporated Submit Documentation Feedback 31
Product Folder Links: DS90UB913Q DS90UB914Q