Datasheet

www.ti.com

Optional use of header provided for external Imager and Host

On DES board,

• Mount L5 (2.7uH), L6 (2.7uH)

• Put jumpers on JP3 and JP4 to match the polarity of supply (check on pin2 of each header)

Figure 4-2. Power over STP: SER configuration

Figure 4-3. Power over STP: DES configuration

4.4 Optional use of header provided for external Imager and Host

This hardware configuration allows connecting an external imager (OV10630) to DS90UB913AQ Serializer

and an external host (PIXCI ECB1-34 Base camera link express card/frame grabber) to DS90UB914AQ

Deserializer board. To operate in this configuration, following hardware changes are required:

1. On Serializer board, populate JP10, R67, R68, R69, R70, R72, R73, R75, R76, R77, R78, R79, R81,

SNLU135–JUNE 2013 Additional Features

Submit Documentation Feedback