Datasheet

Chapter 1
SNLU135–JUNE 2013
Introduction
1.1 Overview
The Texas Instruments DS90UB913A-CXEVM & DS90UB914A-CXEVM REV A Evaluation Modules
(EVM) provides an easy way to evaluate the operation and performance of the DS90UB913AQ /
DS90UB914AQ FPD-Link III Serializer/Deserializer.
(A) The DS90UB913A-CXEVM REV A contains the DS90UB913AQ Evaluation board.
(B) The DS90UB914A-CXEVM REV A contains the DS90UB914AQ Evaluation board
Other components required: Power supply (5V) and 50Ω coaxial cable.
(1) (2)
Figure 1-1. DS90UB913A-CXEVM & DS90UB914A-CXEVM pair
Specification for orderable coax cable:
(3)
Water Blue, FAKRA Jack to FAKRA Jack Cable, 60inch length, using RG174 Coax cable. EVM boards
have SMB connector mounted as shown in Figure 1-1.
(1)
Coax cable is not provided with the EVM.
(2)
Boards are configured to transmit power over coax cable, hence connect power to Deserializer board only.
(3)
Not a specific recommendation, for evaluation purpose only.
2
Introduction SNLU135–JUNE 2013
Submit Documentation Feedback
Copyright © 2013, Texas Instruments Incorporated