Datasheet

NRND
DS90LV049H
www.ti.com SNLS200A –SEPTEMBER 2005–REVISED APRIL 2013
ABSOLUTE MAXIMUM RATINGS
(1)(2)
Supply Voltage (V
DD
) −0.3 V to +4 V
LVCMOS Input Voltage (D
IN
) −0.3 V to (V
DD
+ 0.3 V)
LVDS Input Voltage (R
IN+
, R
IN-
) −0.3 V to +3.9 V
Enable Input Voltage (EN, EN) −0.3 V to (V
DD
+ 0.3 V)
LVCMOS Output Voltage (R
OUT
) −0.3 V to (V
DD
+ 0.3 V)
LVDS Output Voltage (D
OUT+
, D
OUT-
) −0.3 V to +3.9 V
LVCMOS Output Short Circuit Current (R
OUT
) 100 mA
LVDS Output Short Circuit Current (D
OUT+
, D
OUT−
) 24 mA
LVDS Output Short Circuit Current Duration (D
OUT+
, D
OUT−
) Continuous
Storage Temperature Range −65°C to +150°C
Lead Temperature Range
Soldering (4 sec.) +260°C
Maximum Junction Temperature +150°C
Maximum Package Power Dissipation @ +25°C
PW0016A Package 866 mW
Derate PW0016A Package 6.9 mW/°C above +25°C
ESD Rating
(HBM, 1.5 kΩ, 100 pF) ≥ 7 kV
(MM, 0 Ω, 200 pF) ≥ 250 V
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be specified. They are not meant to imply
that the devices should be operated at these limits. ELECTRICAL CHARACTERISTICS specifies conditions of device operation.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
RECOMMENDED OPERATING CONDITIONS
Min Typ Max Units
Supply Voltage (V
DD
) +3.0 +3.3 +3.6 V
Operating Free Air Temperature (T
A
) −40 +25 +125 °C
ELECTRICAL CHARACTERISTICS
Over supply voltage and operating temperature ranges, unless otherwise specified.
(1)(2)(3)
Symbol Parameter Conditions Pin Min Typ Max Units
LVCMOS Input DC Specifications (Driver Inputs, ENABLE Pins)
V
IH
Input High Voltage 2.0 V
DD
V
V
IL
Input Low Voltage GND 0.8 V
D
IN
I
IH
Input High Current V
IN
= V
DD
EN −10 1 +10 μA
EN
I
IL
Input Low Current V
IN
= GND −10 −0.1 +10 μA
V
CL
Input Clamp Voltage I
CL
= −18 mA −1.5 −0.6 V
LVDS Output DC Specifications (Driver Outputs)
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
except: V
TH
, V
TL
, V
OD
and ΔV
OD
.
(2) All typical values are given for: V
DD
= +3.3 V, T
A
= +25°C.
(3) The DS90LV049H's drivers are current mode devices and only function within datasheet specifications when a resistive load is applied
to their outputs. The typical range of the resistor values is 90 Ω to 110 Ω.
Copyright © 2005–2013, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: DS90LV049H