Datasheet

DS90LV027
SNLS003C –JUNE 1998–REVISED APRIL 2013 www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1)
Supply Voltage (V
CC
) −0.3V to +6V
Input Voltage (DI) −0.3V to (V
CC
+ 0.3V)
Output Voltage (DO±) −0.3V to +3.9V
Maximum Package Power Dissipation @ +25°C
D Package 1190 mW
Derate D Package 9.5 mW/°C above +25°C
Storage Temperature Range −65°C to +150°C
Lead Temperature Range
Soldering (4 sec.) +260°C
ESD Rating
(2)
(HBM 1.5 kΩ, 100 pF) ≥ 4.5 kV
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be ensured. They are not meant to imply
that the devices should be operated at these limits. Electrical Characteristics specifies conditions of device operation.
(2) ESD Rating: HBM (1.5 kΩ, 100 pF) ≥ 4.5 kV
Recommended Operating Conditions
Min Typ Max Units
Supply Voltage (V
CC
) 3.0 3.3 3.6 V
Temperature (T
A
) 0 25 70 °C
Electrical Characteristics
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified.
(1) (2) (3)
Symbol Parameter Conditions Pin Min Typ Max Units
DIFFERENTIAL DRIVER CHARACTERISTICS
V
OD
Output Differential Voltage R
L
= 100Ω (Figure 2) DO+, 250 340 450 mV
DO−
ΔV
OD
V
OD
Magnitude Change 0 10 35 mV
V
OH
Output High Voltage 1.43 1.6 V
V
OL
Output Low Voltage 0.9 1.09 V
V
OS
Offset Voltage 0.9 1.25 1.6 V
ΔV
OS
Offset Magnitude Change 0 5 25 mV
I
OZD
TRI-STATE
®
Leakage V
OUT
= V
CC
or GND 0 ±1 ±10 μA
I
OXD
Power-off Leakage V
OUT
= 3.6V or GND, V
CC
= 0V 0 ±1 ±10 μA
I
OSD
Output Short Circuit Current −4 −6 mA
V
IH
Input High Voltage DI 2.0 V
CC
V
V
IL
Input Low Voltage GND 0.8 V
I
IH
Input High Current V
IN
= 3.6V or 2.4V ±1 ±10 μA
I
IL
Input Low Current V
IN
= GND or 0.5V ±1 ±10 μA
V
CL
Input Clamp Voltage I
CL
= −18 mA −1.5 −0.8 V
I
CC
Power Supply Current No Load V
IN
= V
CC
or GND V
CC
1 4 mA
R
L
= 100Ω 8 11 mA
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
except V
OD
.
(2) All typicals are given for: V
CC
= +3.3V and T
A
= +25°C.
(3) The DS90LV027 is a current mode device and only function with datasheet specification when a resistive load is applied to the drivers
outputs.
2 Submit Documentation Feedback Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: DS90LV027