Datasheet

DS90LV011AQ
SNLS296D –MAY 2008–REVISED APRIL 2013 www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1)(2)
Supply Voltage (V
DD
) −0.3V to 4.0V
LVCMOS input voltage (TTL IN) −0.3V to to (V
DD
+ 0.3V)
LVDS output voltage (OUT±) −0.3V to +3.9V
LVDS output short circuit current 24mA
Maximum Package Power Dissipation @ +25°C
DBV Package 794 mW
Derate DBV Package 7.22 mW/°C above +25°C
Package Thermal Resistance (4-Layer, 2 oz. Cu, JEDEC)
θ
JA
138.5°C/Watt
θ
JC
107.0°C/Watt
Storage Temperature −65°C to +150°C
Lead Temperature Range Soldering
(4 sec.) +260°C
Maximum Junction Temperature +135°C
ESD Ratings
HBM
(3)
≥ 8kV
MM
(4)
≥ 250V
CDM
(5)
≥ 1250V
(1) Absolute Maximum Ratings are those values beyond which the safety of the device cannot be ensured. They are not meant to imply that
the devices should be operated at these limits. Electrical Characteristics specifies conditions of device operation.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
(3) Human Body Model, applicable std. JESD22-A114C
(4) Machine Model, applicable std. JESD22-A115-A
(5) Field Induced Charge Device Model, applicable std. JESD22-C101-C
Recommended Operating Conditions
Min Typ Max Units
Supply Voltage (V
DD
) 3.0 3.3 3.6 V
Temperature (T
A
) −40 +25 +125 °C
Electrical Characteristics
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified.
(1)(2)(3)
Symbol Parameter Conditions Pin Min Typ Max Units
|V
OD
| Output Differential Voltage R
L
= 100Ω OUT+, 250 350 450 mV
(Figure 2 and Figure 3) OUT−
ΔV
OD
V
OD
Magnitude Change 3 35 mV
V
OS
Offset Voltage R
L
= 100Ω 1.125 1.22 1.375 V
(Figure 2)
ΔV
OS
Offset Magnitude Change 0 1 25 mV
I
OFF
Power-off Leakage V
OUT
= 3.6V or GND, V
DD
= 0V ±1 ±10 μA
I
OS
Output Short Circuit Current
(4)
V
OUT+
and V
OUT−
= 0V −6 −24 mA
I
OSD
Differential Output Short Circuit V
OD
= 0V −5 −12 mA
Current
(4)
C
OUT
Output Capacitance 3 pF
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
except V
OD
.
(2) All typicals are given for: V
DD
= +3.3V and T
A
= +25°C.
(3) The DS90LV011AQ is a current mode device and only function with datasheet specification when a resistive load is applied to the
drivers outputs.
(4) Output short circuit current (I
OS
) is specified as magnitude only, minus sign indicates direction only.
2 Submit Documentation Feedback Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: DS90LV011AQ