Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - drivers LVDS 1/0 SOT 23 5

DS90LV011AQ

www.ti.com

SNLS296D –MAY 2008–REVISED APRIL 2013

DS90LV011AQ Automotive LVDS Differential Driver

Check for Samples: DS90LV011AQ

FEATURES

DESCRIPTION

The DS90LV011AQ is an LVDS driver optimized for

• AECQ-100 Grade 1

high data rate and low power applications. The

• Conforms to TIA/EIA-644-A Standard

DS90LV011AQ is a current mode driver allowing

• >400Mbps (200MHz) Switching Rates

power dissipation to remain low even at high

frequency. In addition, the short circuit fault current is

• 700 ps (100 ps typical) Maximum Differential

also minimized. The device is designed to support

Skew

data rates in excess of 400Mbps (200MHz) utilizing

• 1.5 ns Maximum Propagation Delay

Low Voltage Differential Signaling (LVDS)

• Single 3.3V Power Supply

technology.

• ±350 mV Differential Signaling

The device is offered in a 5-lead SOT-23 package.

• Power Off Protection (Outputs in TRI-STATE)

The LVDS outputs have been arranged for easy PCB

layout. The differential driver outputs provide low EMI

• Pinout Simplifies PCB Layout

with its typical low output swing of 350 mV. The

• Low Power Dissipation (23 mW @ 3.3V

DS90LV011AQ can be paired with its companion

Typical)

single line receiver, the DS90LT012AQ, or with any of

• SOT-23 5-Lead Package

TI's LVDS receivers, to provide a high-speed LVDS

interface.

• Pin Compatible with SN65LVDS1

Connection Diagram

Figure 1. Top View

See Package Number MF05A

Functional Diagram

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2All trademarks are the property of their respective owners.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (11 pages)

PAGE 1
DS90LV011AQ www.ti.com SNLS296D – MAY 2008 – REVISED APRIL 2013 DS90LV011AQ Automotive LVDS Differential Driver Check for Samples: DS90LV011AQ FEATURES DESCRIPTION • • • • The DS90LV011AQ is an LVDS driver optimized for high data rate and low power applications. The DS90LV011AQ is a current mode driver allowing power dissipation to remain low even at high frequency. In addition, the short circuit fault current is also minimized.
PAGE 2
DS90LV011AQ SNLS296D – MAY 2008 – REVISED APRIL 2013 www.ti.com These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. Absolute Maximum Ratings (1) (2) −0.3V to 4.0V Supply Voltage (VDD) −0.3V to to (VDD + 0.3V) LVCMOS input voltage (TTL IN) −0.3V to +3.
PAGE 3
DS90LV011AQ www.ti.com SNLS296D – MAY 2008 – REVISED APRIL 2013 Electrical Characteristics (continued) Over Supply Voltage and Operating Temperature ranges, unless otherwise specified.(1)(2)(3) Symbol Parameter Conditions Pin Min Max Units 2.0 VDD V GND 0.8 V TTL IN Typ VIH Input High Voltage VIL Input Low Voltage IIH Input High Current VIN = 3.3V or 2.4V ±2 ±10 μA IIL Input Low Current VIN = GND or 0.
PAGE 4
DS90LV011AQ SNLS296D – MAY 2008 – REVISED APRIL 2013 www.ti.com Parameter Measurement Information (continued) Figure 3. Differential Driver Full Load DC Test Circuit Figure 4. Differential Driver Propagation Delay and Transition Time Test Circuit Figure 5.
PAGE 5
DS90LV011AQ www.ti.com SNLS296D – MAY 2008 – REVISED APRIL 2013 REVISION HISTORY Changes from Revision C (April 2013) to Revision D • Page Changed layout of National Data Sheet to TI format ............................................................................................................
PAGE 6
PACKAGE OPTION ADDENDUM www.ti.
PAGE 7
PACKAGE MATERIALS INFORMATION www.ti.com 11-Oct-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing DS90LV011AQMF/NOPB SOT-23 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant DBV 5 1000 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 DS90LV011AQMFE/NOP B SOT-23 DBV 5 250 178.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3 DS90LV011AQMFX/NOP B SOT-23 DBV 5 3000 178.0 8.4 3.2 3.2 1.4 4.0 8.
PAGE 8
PACKAGE MATERIALS INFORMATION www.ti.com 11-Oct-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) DS90LV011AQMF/NOPB SOT-23 DBV 5 1000 210.0 185.0 35.0 DS90LV011AQMFE/NOPB SOT-23 DBV 5 250 210.0 185.0 35.0 DS90LV011AQMFX/NOPB SOT-23 DBV 5 3000 210.0 185.0 35.
PAGE 9
PAGE 10
PAGE 11
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.