Datasheet
DS90LV004
SNLS190P –APRIL 2005–REVISED APRIL 2013
www.ti.com
Absolute Maximum Ratings
(1)
Supply Voltage (V
DD
) −0.3V to +4.0V
CMOS Input Voltage −0.3V to (V
DD
+0.3V)
LVDS Input Voltage
(2)
−0.3V to (V
DD
+0.3V)
LVDS Output Voltage −0.3V to (V
DD
+0.3V)
LVDS Output Short Circuit Current -90 mA
Junction Temperature +150°C
Storage Temperature −65°C to +150°C
Lead Temperature (Solder, 4sec) 260°C
Max Pkg Power Capacity @ 25°C 1.64W
Thermal Resistance (θ
JA
) 76°C/W
Package Derating above +25°C 13.2mW/°C
ESD Last Passing Voltage (LVDS Output pins)
HBM, 1.5kΩ, 100pF 12 kV
EIAJ, 0Ω, 200pF 250V
Charged Device Model 1000V
ESD Last Passing Voltage (All other pins)
HBM, 1.5kΩ, 100pF 8 kV
EIAJ, 0Ω, 200pF 250V
Charged Device Model 1000V
(1) Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met,
without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. TI
does not recommend operation of products outside of recommended operation conditions.
(2) V
ID
max < 2.4V
Recommended Operating Conditions
Supply Voltage (V
CC
) 3.15V to 3.45V
Input Voltage (V
I
)
(1)
0V to V
CC
Output Voltage (V
O
) 0V to V
CC
Operating Temperature (T
A
)
Industrial −40°C to +85°C
(1) V
ID
max < 2.4V
Electrical Characteristics
Over recommended operating supply and temperature ranges unless other specified.
Typ
Symbol Parameter Conditions Min Max Units
(1)
LVTTL DC SPECIFICATIONS (PWDN, PEM0, PEM1)
V
IH
High Level Input Voltage 2.0 V
DD
V
V
IL
Low Level Input Voltage GND 0.8 V
I
IH
High Level Input Current V
IN
= V
DD
= V
DDMAX
−10 +10 µA
I
IL
Low Level Input Current V
IN
= V
SS
, V
DD
= V
DDMAX
−10 +10 µA
C
IN1
Input Capacitance Any Digital Input Pin to V
SS
3.5 pF
V
CL
Input Clamp Voltage I
CL
= −18 mA −1.5 −0.8 V
LVDS INPUT DC SPECIFICATIONS (INn±)
V
TH
Differential Input High Threshold V
CM
= 0.8V to 3.4V,
0 100 mV
(2)
V
DD
= 3.45V
V
TL
Differential Input Low Threshold V
CM
= 0.8V to 3.4V,
−100 0 mV
(2)
V
DD
= 3.45V
V
ID
Differential Input Voltage V
CM
= 0.8V to 3.4V, V
DD
= 3.45V 100 2400 mV
(1) Typical parameters are measured at V
DD
= 3.3V, T
A
= 25°C. They are for reference purposes, and are not production-tested.
(2) Differential output voltage V
OD
is defined as ABS(OUT+–OUT−). Differential input voltage V
ID
is defined as ABS(IN+–IN−).
4 Submit Documentation Feedback Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: DS90LV004