Datasheet

DS90LV001
www.ti.com SNLS067E –JANUARY 2001–REVISED APRIL 2013
DS90LV001 Pin Descriptions (SOIC and WSON)
Pin Name Pin # Input/Output Description
GND 1 P Ground
IN − 2 I Inverting receiver LVDS input pin
IN+ 3 I Non-inverting receiver LVDS input pin
NC 4 No Connect
V
CC
5 P Power Supply, 3.3V ± 0.3V.
OUT+ 6 O Non-inverting driver LVDS output pin
OUT - 7 O Inverting driver LVDS output pin
EN 8 I Enable pin. When EN is LOW, the driver is disabled and the LVDS outputs are in TRI-
STATE. When EN is HIGH, the driver is enabled. LVCMOS/LVTTL levels.
DAP NA NA Die Attach Pad or DAP (WSON Package only). The DAP is NOT connected to the
device GND nor any other pin. It is still recommended to connect the DAP to a GND
plane of a PCB for enhenced heat dissipation.
TYPICAL APPLICATIONS
Backplane Stub-Hider Application
Cable Repeater Application
Copyright © 2001–2013, Texas Instruments Incorporated Submit Documentation Feedback 7
Product Folder Links: DS90LV001