Datasheet

DS90LT012A, DS90LV012A
www.ti.com SNLS141D –AUGUST 2002–REVISED APRIL 2013
Absolute Maximum Ratings
(1)
Supply Voltage (V
DD
) −0.3V to +4V
Input Voltage (IN+, IN−) −0.3V to +3.9V
Output Voltage (TTL OUT) −0.3V to (V
DD
+ 0.3V)
Output Short Circuit Current −100mA
Maximum Package Power Dissipation @ +25°C
NGK Package 2.26 W
Derate NGK Package 18.1 mW/°C above +25°C
Thermal resistance (θ
JA
) 55.3°C/W
DBV Package 902mW
Derate DBV Package 7.22 mW/°C above +25°C
Thermal resistance (θ
JA
) 138.5°C/W
Storage Temperature Range −65°C to +150°C
Lead Temperature Range Soldering (4 sec.) +260°C
Maximum Junction Temperature +150°C
ESD Ratings
(2)
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be ensured. They are not meant to imply
that the devices should be operated at these limits. Electrical Characteristics specifies conditions of device operation.
(2) ESD Ratings:
(a) DS90LV012A:
(a) HBM (1.5 kΩ, 100 pF) ≥ 2kV
(b) EIAJ (0Ω, 200 pF) ≥ 900V
(c) CDM ≥ 2000V
(d) IEC direct (330Ω, 150 pF) ≥ 5kV
(b) DS90LT012A:
(a) HBM (1.5 kΩ, 100 pF) ≥ 2kV
(b) EIAJ (0Ω, 200 pF) ≥ 700V
(c) CDM ≥ 2000V
(d) IEC direct (330Ω, 150 pF) ≥ 7kV
Recommended Operating Conditions
Min Typ Max Units
Supply Voltage (V
DD
) +2.7 +3.3 +3.6 V
Operating Free Air Temperature (T
A
) −40 25 +85 °C
Electrical Characteristics
Over Supply Voltage and Operating Temperature ranges, unless otherwise specified.
(1) (2)
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
unless otherwise specified (such as V
ID
).
(2) All typicals are given for: V
DD
= +3.3V and T
A
= +25°C.
Copyright © 2002–2013, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: DS90LT012A DS90LV012A