Datasheet
DS90CR216A, DS90CR286A
SNLS043F –MAY 2000–REVISED FEBRUARY 2013
www.ti.com
Absolute Maximum Ratings
(1)(2)
Supply Voltage (V
CC
) −0.3V to +4V
CMOS/TTL Output Voltage −0.3V to (V
CC
+ 0.3V)
LVDS Receiver Input Voltage −0.3V to (V
CC
+ 0.3V)
Junction Temperature +150°C
Storage Temperature −65°C to +150°C
Lead Temperature (Soldering, 4 sec) +260°C
DGG0056A (TSSOP) Package DS90CR286AMTD 1.61 W
Maximum Package Power
Dissipation Capacity @ 25°C
DGG0048A (TSSOP) Package DS90CR216AMTD 1.89 W
DS90CR286AMTD 12.4 mW/°C above +25°C
Package Derating
DS90CR216AMTD 15 mW/°C above +25°C
(HBM, 1.5 kΩ, 100 pF) > 7 kV
ESD Rating
(EIAJ, 0Ω, 200 pF) > 700V
(1) If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.
(2) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to
imply that the device should be operated at these limits. “Electrical Characteristics” specify conditions for device operation.
Recommended Operating Conditions
Min Nom Max Units
Supply Voltage (V
CC
) 3.0 3.3 3.6 V
Operating Free Air Temperature (T
A
) −40 +25 +85 °C
Receiver Input Range 0 2.4 V
Supply Noise Voltage (V
CC
) 100 mV
PP
Electrical Characteristics
(1)(2)
Over recommended operating supply and temperature ranges unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Units
CMOS/TTL DC SPECIFICATIONS (For PowerDown Pin)
V
IH
High Level Input Voltage 2.0 V
CC
V
V
IL
Low Level Input Voltage GND 0.8 V
V
CL
Input Clamp Voltage I
CL
= −18 mA −0.79 −1.5 V
I
IN
V
IN
= 0.4V, 2.5V or V
CC
+1.8 +10 μA
Input Current
V
IN
= GND −10 0 μA
CMOS/TTL DC SPECIFICATIONS
V
OH
High Level Output Voltage I
OH
= −0.4 mA 2.7 3.3 V
V
OL
Low Level Output Voltage I
OL
= 2 mA 0.06 0.3 V
I
OS
Output Short Circuit Current V
OUT
= 0V −60 −120 mA
LVDS RECEIVER DC SPECIFICATIONS
V
TH
Differential Input High Threshold V
CM
= +1.2V +100 mV
V
TL
Differential Input Low Threshold −100 mV
I
IN
V
IN
= +2.4V, V
CC
= 3.6V ±10 μA
Input Current
V
IN
= 0V, V
CC
= 3.6V ±10 μA
(1) Typical values are given for V
CC
= 3.3V and T
A
= +25C.
(2) Current into device pins is defined as positive. Current out of device pins is defined as negative. Voltages are referenced to ground
unless otherwise specified (except V
OD
and ΔV
OD
).
2 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: DS90CR216A DS90CR286A