Datasheet

DS90CF366, DS90CF386
www.ti.com SNLS055I –NOVEMBER 1999–REVISED APRIL 2013
DS90CF386 DGG0056A Package PIN DESCRIPTIONS—24-Bit FPD Link Receiver
Pin Name I/O No. Description
RxIN+ I 4 Positive LVDS differentiaI data inputs.
RxIN− I 4 Negative LVDS differential data inputs.
RxOUT O 28 TTL level data outputs. This includes: 8 Red, 8 Green, 8 Blue, and 3 control lines—FPLINE, FPFRAME,
DRDY (also referred to as HSYNC, VSYNC, Data Enable).
RxCLK IN+ I 1 Positive LVDS differential clock input.
RxCLK IN− I 1 Negative LVDS differential clock input.
RxCLK OUT O 1 TTL Ievel clock output. The falling edge acts as data strobe.
PWR DOWN I 1 TTL level input. When asserted (low input) the receiver outputs are low.
V
CC
I 4 Power supply pins for TTL outputs.
GND I 5 Ground pins for TTL outputs.
PLL V
CC
I 1 Power supply for PLL.
PLL GND I 2 Ground pin for PLL.
LVDS V
CC
I 1 Power supply pin for LVDS inputs.
LVDS GND I 3 Ground pins for LVDS inputs.
DS90CF366 DGG0048A Package PIN DESCRIPTIONS—18-Bit FPD Link Receiver
Pin Name I/O No. Description
RxIN+ I 3 Positive LVDS differentiaI data inputs.
RxIN− I 3 Negative LVDS differential data inputs.
RxOUT O 21 TTL level data outputs. This includes: 6 Red, 6 Green, 6 Blue, and 3 control lines—FPLINE, FPFRAME,
DRDY (also referred to as HSYNC, VSYNC, Data Enable).
RxCLK IN+ I 1 Positive LVDS differential clock input.
RxCLK IN− I 1 Negative LVDS differential clock input.
RxCLK OUT O 1 TTL Ievel clock output. The falling edge acts as data strobe.
PWR DOWN I 1 TTL level input. When asserted (low input) the receiver outputs are low.
V
CC
I 4 Power supply pins for TTL outputs.
GND I 5 Ground pins for TTL outputs.
PLL V
CC
I 1 Power supply for PLL.
PLL GND I 2 Ground pin for PLL.
LVDS V
CC
I 1 Power supply pin for LVDS inputs.
LVDS GND I 3 Ground pins for LVDS inputs.
Copyright © 1999–2013, Texas Instruments Incorporated Submit Documentation Feedback 9
Product Folder Links: DS90CF366 DS90CF386