Datasheet

DS90CF363B
SNLS180D –JULY 2004–REVISED APRIL 2013 www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1)(2)
Value Unit
Supply Voltage (V
CC
) −0.3 to +4 V
CMOS/TTL Input Voltage −0.3 to (V
CC
+ 0.3) V
LVDS Driver Output Voltage −0.3 to (V
CC
+ 0.3) V
LVDS Output Short Circuit
Duration Continuous
Junction Temperature +150 °C
Storage Temperature −65 to +150 °C
Lead Temperature
(Soldering, 4 sec) +260 °C
Maximum Package Power Dissipation Capacity @ 25°C
DGG-48 (TSSOP) Package: DS90CF363B 1.98 W
Package Derating:
DS90CF363B 16 mW/°C above +25°C
ESD Rating (HBM, 1.5 kΩ, 100 pF) 7 kV
ESD Rating (EIAJ, 0Ω, 200 pF) 500 V
(1) Absolute Maximum Ratings are those values beyond which the safety of the device cannot be verified. They are not meant to imply that
the device should be operated at these limits. Electrical Characteristics specify conditions for device operation.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
Recommended Operating Conditions
Min Nom Max Units
Supply Voltage (V
CC
) 3.0 3.3 3.6 V
Operating Free Air Temperature (T
A
) −10 +25 +70 °C
Supply Noise Voltage (V
CC
) 200 mV
PP
TxCLKIN frequency 18 68 MHz
Electrical Characteristics
(1)
Over recommended operating supply and temperature ranges unless otherwise specified.
Symbol Parameter Conditions Min Typ
(2)
Max Units
CMOS/TTL DC SPECIFICATIONS
V
IH
High Level Input Voltage 2.0 V
CC
V
V
IL
Low Level Input Voltage GND 0.8 V
V
CL
Input Clamp Voltage I
CL
= −18 mA −0.79 −1.5 V
I
IN
Input Current V
IN
= 0.4V, 2.5V or V
CC
+1.8 +10 μA
V
IN
= GND −10 0 μA
LVDS DC SPECIFICATIONS
V
OD
Differential Output Voltage R
L
= 100Ω 250 345 450 mV
ΔV
OD
Change in V
OD
between complimentary 35 mV
output states
V
OS
Offset Voltage
(3)
1.13 1.25 1.38 V
ΔV
OS
Change in V
OS
between complimentary 35 mV
output states
I
OS
Output Short Circuit Current V
OUT
= 0V, R
L
= 100Ω −3.5 −5 mA
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. Voltages are referenced to ground
unless otherwise specified (except V
OD
and ΔV
OD
).
(2) Typical values are given for V
CC
= 3.3V and T
A
= +25°C unless specified otherwise.
(3) V
OS
previously referred as V
CM
.
2 Submit Documentation Feedback Copyright © 2004–2013, Texas Instruments Incorporated
Product Folder Links: DS90CF363B