Datasheet

DS90C387, DS90CF388
www.ti.com SNLS012H –MAY 2000–REVISED APRIL 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1)(2)
Supply Voltage (V
CC
) −0.3V to +4V
CMOS/TTL Input Voltage −0.3V to +5.5V
CMOS/TTL Output Voltage −0.3V to (V
CC
+ 0.3V)
LVDS Receiver Input Voltage −0.3V to +3.6V
LVDS Driver Output Voltage −0.3V to +3.6V
LVDS Output Short Circuit Duration Continuous
Junction Temperature +150°C
Storage Temperature −65°C to +150°C
Lead Temperature (Soldering, 4 seconds) +260°C
DS90C387 2.8W
Maximum Package Power Dissipation Capacity at 25°C, 100 TQFP
Package
DS90CF388 2.8W
DS90C387 18.2mW/°C above +25°C
Package Derating
DS90CF388 18.2mW/°C above +25°C
HBM, 1.5kΩ, 100pF > 6 kV
DS90C387
EIAJ, 0Ω, 200pF > 300 V
ESD Rating
HBM, 1.5kΩ, 100pF > 2 kV
DS90CF388
EIAJ, 0Ω, 200pF > 200 V
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be ensured. They are not meant to imply
that the device should be operated at these limits. The tables of “Electrical Characteristics” specify conditions for device operation.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
Recommended Operating Conditions
Min Nom Max Unit
Supply Voltage (V
CC
) 3.0 3.3 3.6 V
Operating Free Air Temperature (T
A)
−10 +25 +70 °C
Receiver Input Range 0 2.4 V
Supply Noise Voltage (V
CC
) 100 mV
p-p
Electrical Characteristics
(1)
Over recommended operating supply and temperature ranges unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
CMOS/TTL DC SPECIFICATIONS (Tx inputs, Rx outputs, control inputs and outputs)
V
IH
High Level Input Voltage 2.0 5.0 V
V
IL
Low Level Input Voltage GND 0.8 V
V
OH
High Level Output Voltage I
OH
= −0.4 mA 2.7 2.9 V
I
OH
= −2 mA 2.7 2.85 V
V
OL
Low Level Output Voltage I
OL
= 2 mA 0.1 0.3 V
V
CL
Input Clamp Voltage I
CL
= −18 mA −0.79 −1.5 V
I
IN
Input Current V
IN
= 0.4V, 2.5V or V
CC
+1.8 +15 µA
V
IN
= GND −15 0 µA
I
OS
Output Short Circuit Current V
OUT
= 0V −120 mA
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. Voltages are referenced to ground
unless otherwise specified (except V
OD
and ΔV
OD
).
Copyright © 2000–2013, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: DS90C387 DS90CF388