Datasheet

DS89C387
SNLS101E –MAY 1995–REVISED APRIL 2013 www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1)(2)(3)
Supply Voltage (V
CC
) −0.5 to 7.0V
DC Voltage (V
IN
) −1.5 to V
CC
+1.5V
DC Output Voltage (V
OUT
) −0.5 to 7V
Clamp Diode Current (I
IK
, I
OK
) ±20 mA
DC Output Current, per pin (I
OUT
) ±150 mA
DC V
CC
or GND Current (I
CC
) ±500 mA
Storage Temperature Range (T
STG
) −65°C to +150°C
Junction Temperature +150°C
Maximum Power Dissipation (P
D
) @ 25°C
(4)
SSOP Package 1359 mW
Thermal Resistance
θ
JA
81.7°C/W
θ
JC
31.7°C/W
Lead Temperature (T
L
)
(Soldering 4 sec.) 260°C
This device does not meet 2000V ESD rating.
(5)
(1) Unless otherwise specified, all voltages are referenced to ground. All currents into device pins are positive; all currents out of device
pins are negative.
(2) Absolute Maximum Ratings are those values beyond which the safety of the device cannot be specified. They are not meant to imply
that the device should be operated at these limits. The table of “Electrical Characteristics” provide conditions for actual device operation.
(3) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(4) Ratings apply to ambient temperature at 25°C. Above this temperature derate SSOP (MEA) Package 10.9 mW/°C.
(5) ESD Rating: HBM (1.5 kΩ, 100 pF) Inputs ≥ 1500V Outputs ≥ 1000V EIAJ (0Ω, 200 pF) All Pins ≥ 350V
Operating Conditions
Min Max Units
Supply Voltage (V
CC
) 4.50 5.50 V
DC Input or Output Voltage (V
IN
, V
OUT
) 0 V
CC
V
Operating Temperature Range (T
A
)
DS89C387T −40 +85 °C
Input Rise or Fall Times (t
r
, t
f
) 500 ns
DC Electrical Characteristics
(1)(2)
V
CC
= 5V ±10% (unless otherwise specified)
Parameter Test Conditions Min Typ Max Units
V
IH
High Level Input 2.0 V
CC
V
Voltage
V
IL
Low Level Input GND 0.8 V
Voltage
V
OH
High Level Output V
IN
= V
IH
or V
IL
, 2.5 3.4 V
Voltage I
OUT
= −20 mA
V
OL
Low Level Output V
IN
= V
IH
or V
IL
, 0.3 0.5 V
Voltage I
OUT
= 48 mA
(1) Unless otherwise specified, all voltages are referenced to ground. All currents into device pins are positive; all currents out of device
pins are negative.
(2) Unless otherwise specified, min/max limits apply across the −40°C to 85°C temperature range. All typicals are given for V
CC
= 5V and
T
A
= 25°C.
2 Submit Documentation Feedback Copyright © 1995–2013, Texas Instruments Incorporated
Product Folder Links: DS89C387