Datasheet

DS89C386
SNLS100C –MAY 1995–REVISED APRIL 2013 www.ti.com
Absolute Maximum Ratings
(1)(2)(3)
Supply Voltage (V
CC
) −0.5 to 7V
Input Common Mode Range (V
CM
) ±14V
Differential Input Voltage (V
DIFF
) ±14V
Enable Input Voltage (V
IN)
7V
Storage Temperature Range (T
STG
) −65°C to +150°C
Lead Temperature (Soldering 4 sec) 260°C
Maximum Power Dissipation at 25°C
(4)
SSOP Package 1359 mW
Current Per Output ±25 mA
This device does not meet 2000V ESD rating.
(5)
(1) Unless otherwise specified, all voltages are referenced to ground.
(2) Absolute Maximum Ratings are those values beyond which the safety of the device cannot be specified. They are not meant to imply
that the device should be operated at these limits. The table of “Electrical Characteristics” provides conditions for actual device
operation.
(3) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(4) Ratings apply to ambient temperature at 25°C. Above this temperature derate SSOP (MEA) Package 10.9 mW/°C.
(5) ESD Rating: HEM (1.5 kΩ, 100 pF) Inputs ≥ 2000V Outputs ≥ 1000V EIAJ (0Ω, 200 pF) All Pins ≥ 350V
Operating Conditions
Min Max Unit
Supply Voltage (V
CC
) 4.50 5.50 V
Operating Temperature Range (T
A
)
DS89C386T −40 +85 °C
Enable Input Rise or Fall Times 500 ns
DC Electrical Characteristics
(1)
V
CC
= 5V ±10% (unless otherwise specified)
Parameter Test Conditions Min Typ Max Units
V
TH
Differential Input Voltage V
OUT
= V
OH
or V
OL
−200 ±35 +200 mV
−7V < V
CM
< +7V
V
HYST
Input Hysteresis V
CM
= 0V 70 mV
R
IN
Input Resistance V
IN
= −7V, +7V 5.0 6.8 10 kΩ
(Other Input = GND)
I
IN
Input Current V
IN
= +10V, Other Input = GND +1.1 +1.5 mA
(Under Test) V
IN
= −10V, Other Input = GND −2.0 −2.5 mA
V
OH
High Level Output Voltage V
CC
= Min., V
(DIFF)
= +1V 3.8 4.2 V
I
OUT
= −6.0 mA
V
OL
Low Level Output Voltage V
CC
= Max., V
(DIFF)
= −1V 0.2 0.3 V
I
OUT
= 6.0 mA
V
IH
Enable High Input Level Voltage 2.0 V
CC
V
V
IL
Enable Low Input Level Voltage GND 0.8 V
I
OZ
TRI-STATE Output Leakage Current V
OUT
= V
CC
or GND, EN = V
IL
±0.5 ±5.0 μA
I
I
Enable Input Current V
IN
= V
CC
or GND ±1.0 μA
I
CC
Quiescent Power Supply Current V
CC
= Max., V
(DIFF)
= +1V 48 69 mA
(1) Unless otherwise specified, Min/Max limits apply across the operating temperature range. All typicals are given for V
CC
= 5V and T
A
=
25°C.
2 Submit Documentation Feedback Copyright © 1995–2013, Texas Instruments Incorporated
Product Folder Links: DS89C386