Datasheet

DS3695, DS3695T, DS3696, DS3697
SNLS072C –MAY 1998–REVISED APRIL 2013 www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1)(2)
VALUE UNIT
Supply Voltage, V
CC
7 V
Control Input Voltages 7 V
Driver Input Voltage 7 V
Driver Output Voltages +15/−10 V
Receiver Input Voltages (DS3695, DS3696) +15/−10 V
Receiver Common Mode Voltage (DS3697) ±25 V
Receiver Output Voltage 5.5 V
Continuous Power Dissipation @ 25°C - N Package
(3)
1.07 W
Storage Temperature Range −65 to +150 °C
Lead Temperature (Soldering, 4 sec.) 260 °C
(1) “Absolute Maximum Ratings” are those beyond which the safety of the device cannot be verified. They are not meant to imply that the
device should be operated at these limits. The tables of “Electrical Characteristics” provide conditions for actual device operation.
(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.
(3) All typicals are given for V
CC
= 5V and T
A
= 25°C.
Recommended Operating Conditions
Min Max Units
Supply Voltage, V
CC
4.75 5.25 V
Bus Voltage −7 +12 V
Operating Free Air Temp. (T
A
) Commercial 0 +70 °C
Industrial −40 +85 °C
Electrical Characteristics
(1)(2)
0°C ≤ T
A
≤ +70°C, 4.75V < V
CC
< 5.25V unless otherwise specified
Symbol Parameter Conditions Min Typ Max Units
V
OD1
Differential Driver Output Voltage (Unloaded) I
O
= 0 5 V
V
OD2
Differential Driver Output Voltage (with Load) See Figure 4 R = 50Ω; (RS-422)
(3)
2 V
R = 27Ω; (RS-485) 1.5 V
ΔV
OD
Change in Magnitude of Driver See Figure 4 R = 27Ω 0.2 V
Differential Output Voltage for
Complementary Output States
V
OC
Driver Common Mode Output Voltage 3.0 V
Δ|V
OC
| Change in Magnitude of Driver 0.2 V
Common Mode Output Voltage for
Complementary Output States
V
IH
Input High Voltage DI, DE, RE , E, RE /DE 2 V
V
IL
Input Low Voltage 0.8 V
V
CL
Input Clamp Voltage I
IN
= −18 mA −1.5 V
I
IL
Input Low Current V
IL
= 0.4V −200 μA
I
IH
Input High Current V
IH
= 2.4V 20 μA
I
IN
Input Current DO/RI, DO /RI RI, RI V
CC
= 0V or 5.25V V
IN
= 12V +1.0 mA
RE /DE or DE = 0V
V
IN
= −7V −0.8 mA
(1) All currents into device pins are positive; all currents out of device pins are negative. All voltages are referenced to device ground unless
otherwise specified.
(2) All typicals are given for V
CC
= 5V and T
A
= 25°C.
(3) All limits for which derate linearly at 11.1 mW/°C to 570 mW at 70°C is applied must be derated by 10% for DS3695T and DS3696T.
Other parameters remain the same for this extended temperature range device (−40°C ≤ T
A
≤ +85°C).
2 Submit Documentation Feedback Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: DS3695 DS3695T DS3696 DS3697