Datasheet

DS34LV87T
www.ti.com SNLS116D –JULY 2006–REVISED APRIL 2013
TYPICAL APPLICATION INFORMATION
General application guidelines and hints for differential drivers and receivers may be found in the following
application notes:
• Transmission Line Drivers and Receivers for TIA/EIA Standards RS-422 and RS-423(SNLA137)
• A Comparison of Differential Termination Techniques(SNLA304)
Power Decoupling Recommendations:
Bypass caps must be used on power pins. High frequency ceramic (surface mount is recommended) 0.1 μF in
parallel with 0.01 μF at the power supply pin. A 10 μF or greater tantalum or electrolytic should be connected at
the power entry point on the printed circuit board.
R
T
is optional although highly recommended to reduce reflection
Figure 7. Typical Driver Connection
Figure 8. Typical Driver Output Waveforms
Copyright © 2006–2013, Texas Instruments Incorporated Submit Documentation Feedback 7
Product Folder Links: DS34LV87T