Datasheet

DS34LV86T
SNLS115D –JUNE 2000–REVISED APRIL 2013 www.ti.com
TYPICAL APPLICATION INFORMATION
General application guidelines and hints for differential drivers receivers may be found in the following application
notes:
AN-214 (SNLA137), AN-457 (SNLA148), AN-805 (SNOA233), AN-847 (SNLA031), AN-903 (SNLA034), AN-912
(SNLA036), AN-916 (SNLA219)
Power Decoupling Recommendations: Bypass caps must be used on power pins. High frequency ceramic
(surface mount is recommended) 0.1 μF in paraIIel with 0.01 μF at the power supply pin. A 10 μF or greater solid
tantalum or electrolytic should be connected at the power entry point on the printed circuit board.
R
T
is optional although highly recommended to reduce reflection
Figure 6. Typical Receiver Connections
Figure 7. Typical Receiver Output Waveforms
6 Submit Documentation Feedback Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: DS34LV86T