Datasheet

DS3486
www.ti.com SNLS354D –MAY 1998–REVISED APRIL 2013
Electrical Characteristics
(1)
(continued)
(Unless otherwise noted, minimum and maximum limits apply over recommended temperature and power supply voltage
ranges. Typical values are for T
A
= 25°C, V
CC
= 5V and V
IC
= 0V.)
Symbol Parameter Conditions Min Typ Max Units
I
OZ
Output TRI-STATE Leakage Current V
I(D)
= 3V, V
IL
= 0.8V, V
OL
= 0.5V −40 μA
V
I(D)
= −3V, V
IL
= 0.8V, V
OH
= 2.7V 40 μA
I
OS
Output Short-Circuit Current V
I(D)
= 3V, V
IH
TRI-STATE = 2V, −15 −100 mA
V
O
= 0V,
(3)
I
IL
Input Current—Low Logic State V
IL
= 0.5V
−100 μA
(TRI-STATE Control)
I
IH
Input Current—High Logic State V
IH
= 2.7V 20 μA
(TRI-STATE Control)
V
IH
= 5.25V 100 μA
V
IC
Input Clamp Diode Voltage I
IN
= −10 mA
−1.5 V
(TRI-STATE Control)
I
CC
Power Supply Current All Inputs V
IL
= 0V 85 mA
(3) Only one output at a time should be shorted.
Switching Characteristics
(Unless otherwise noted, V
CC
= 5V and T
A
= 25°C.)
Symbol Parameter Min Typ Max Units
t
PHL(D)
Propagation Delay Time—Differential Inputs to Output 19 35 ns
Output High to Low
t
PLH(D)
Output Low to High 19 30 ns
t
PLZ
TRI-STATE Control to Output 23 35 ns
Output Low to TRI-STATE
t
PHZ
Output High to TRI-STATE 25 35 ns
t
PZH
Output TRI-STATE to High 18 30 ns
t
PZL
Output TRI-STATE to Low 20 30 ns
AC TEST CIRCUIT AND SWITCHING TIME WAVEFORMS
Copyright © 1998–2013, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: DS3486