Datasheet

DS26LV31T
www.ti.com SNLS114C –MARCH 1999–REVISED FEBRUARY 2013
Typical Application Information
General application guidelines and hints for differential drivers and receivers may be found in the following
application notes:
• AN-214
• AN-457
• AN-805
• AN-847
• AN-903
• AN-912
• AN-916
Power Decoupling Recommendations:
Bypass caps must be used on power pins. High frequency ceramic (surface mount is recommended) 0.1 μF in
parallel with 0.01 μF at the power supply pin. A 10 μF or greater solid tantalum or electrolytic should be
connected at the power entry point on the printed circuit board.
R
T
is optional although highly recommended to reduce reflection.
Figure 7. Typical Driver Connection
Figure 8. Typical Driver Output Waveforms
Copyright © 1999–2013, Texas Instruments Incorporated Submit Documentation Feedback 7
Product Folder Links: DS26LV31T