Datasheet

DS25BR120
www.ti.com SNLS256E –MARCH 2007–REVISED APRIL 2013
Absolute Maximum Ratings
(1)(2)
Supply Voltage (V
CC
) −0.3V to +4V
LVCMOS Input Voltage (PE0, PE1) −0.3V to (V
CC
+ 0.3V)
LVDS Input Voltage (IN+, IN−) −0.3V to +4V
Differential Input Voltage |VID| 1.0V
LVDS Output Voltage (OUT+, OUT−) −0.3V to (V
CC
+ 0.3V)
LVDS Differential Output Voltage ((OUT+) - (OUT−)) 0V to 1.0V
LVDS Output Short Circuit Current Duration 5 ms
Junction Temperature +150°C
Storage Temperature Range −65°C to +150°C
Lead Temperature Range
Soldering (4 sec.) +260°C
Maximum Package Power Dissipation at 25°C
NGQ Package 2.08W
Derate NGQ Package 16.7 mW/°C above +25°C
Package Thermal Resistance
θ
JA
+60.0°C/W
θ
JC
+12.3°C/W
ESD Susceptibility
HBM
(3)
≥7 kV
MM
(4)
≥250V
CDM
(5)
≥1250V
(1) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of
device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or
other conditions beyond those indicated in the Recommended Operating Conditions is not implied. The Recommended Operating
Conditions indicate conditions at which the device is functional and the device should not be operated beyond such conditions.
(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.
(3) Human Body Model, applicable std. JESD22-A114C
(4) Machine Model, applicable std. JESD22-A115-A
(5) Field Induced Charge Device Model, applicable std. JESD22-C101-C
Recommended Operating Conditions
Min Typ Max Units
Supply Voltage (V
CC
) 3.0 3.3 3.6 V
Receiver Differential Input Voltage (V
ID
) 0 1.0 V
Operating Free Air Temperature (T
A
) −40 +25 +85 °C
Electrical Characteristics
Over recommended operating supply and temperature ranges unless otherwise specified.
(1)(2)(3)
Symbol Parameter Conditions Min Typ Max Units
LVCMOS INPUT DC SPECIFICATIONS (PE0, PE1)
V
IH
High Level Input Voltage 2.0 V
CC
V
V
IL
Low Level Input Voltage GND 0.8 V
I
IH
High Level Input Current V
IN
= 3.6V 0 ±10 μA
V
CC
= 3.6V
I
IL
Low Level Input Current V
IN
= GND 0 ±10 μA
V
CC
= 3.6V
(1) The Electrical Characteristics tables list ensured specifications under the listed Recommended Operating Conditions except as
otherwise modified or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and
are not ensured.
(2) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
except V
OD
and ΔV
OD
.
(3) Typical values represent most likely parametric norms for V
CC
= +3.3V and T
A
= +25°C, and at the Recommended Operation Conditions
at the time of product characterization and are not ensured.
Copyright © 2007–2013, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Links: DS25BR120