Datasheet

DS14C88
SNLS080C –MAY 1998–REVISED APRIL 2013 www.ti.com
Absolute Maximum Ratings
(1)(2)(3)(4)
Supply Voltage
V
+
Pin +13V
V
−
Pin −13V
Driver Input Voltage (V
+
) +0.3V to GND −0.3V
Driver Output Voltage |(V
+
) − V
O
| ≤ 30V
|(V
−
) − V
O
| ≤ 30V
Continuous Power Dissipation @+25°C
(5)
NFF0014A Package 1513 mW
D0014A Package 1063 mW
Junction Temperature +150°C
Lead Temperature (Soldering 4 seconds) +260°C
Storage Temperature Range −65°C to +150°C
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be Ensured. They are not meant to imply
that the devices should be operated at these limits. The tables of “Electrical Characteristics” specify conditions for device operation.
(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.
(3) This Product does not meet 2000V ESD rating.
(4) ESD Rating (HBM, 1.5 kΩ, 100 pF) ≥ 1.0 kV.
(5) Derate NFF0014A Package 12.1 mW/°C, and D0014A Package 8.5 mW/°C above +25°C.
Recommended Operating Conditions
Min Max Units
V
+
Supply (GND = 0V) +4.5 +12.6 V
V
−
Supply (GND = 0V) −4.5 −12.6 V
Operating Free Air Temp. (T
A
)
DS14C88 0 +75 °C
Electrical Characteristics
Over Recommended Operating Conditions, unless otherwise specified
Parameter Test Conditions Min Typ Max Units
I
IL
Maximum Low Input Current V
IN
= GND +10 μA
I
IH
Maximum High Input Current V
IN
= V
+
−10 μA
V
IL
Low Level Input Voltage V
+
≥ +7V, V
−
≤ −7V GND 0.8 V
V
+
< +7V, V
−
> −7V GND 0.6 V
V
IH
High Level Input Voltage 2.0 V
+
V
V
OL
Low Level Output Level V
IN
= V
IH
V
+
= 4.5V, V
−
= −4.5V −4.0 −3.0 V
R
L
= 3 kΩ or 7 kΩ
V
+
= 9V, V
−
= 9V −8.0 −6.5 V
V
+
= 12V, V
−
= −12V −10.5 −9.0 V
V
OH
High Level Output Level V
IN
= V
IL
V
+
= 4.5V, V
−
= −4.5V 3.0 4.0 V
R
L
= 3 kΩ or 7 kΩ
V
+
= 9V, V
−
= −9V 6.5 8.0 V
V
+
= 12V, V
−
= −12V 9.0 10.5 V
I
OS+
High Level Output Short Circuit V
IN
= 0.8V, V
O
= GND V
+
= +12V, V
−
= −12V
−45 mA
Current
(1)
I
OS−
Low Level Output Short Circuit V
IN
= 2.0V, V
O
= GND
+45 mA
Current
(1)
R
OUT
Output Resistance V
+
= V
−
= GND = 0V
300 Ω
−2V ≤ V
O
≤ +2V
(2)
(Figure 2 )
(1) I
OS+
and I
OS−
values are for one output at a time. If more than one output is shorted simultaneously, the device dissipation may be
exceeded.
(2) Power supply (V
+
, V
−
) and GND pins are connected to ground for the Output Resistance Test (R
O
).
2 Submit Documentation Feedback Copyright © 1998–2013, Texas Instruments Incorporated
Product Folder Links: DS14C88