Datasheet

OUT+
OUT-
DS10BR150
IN+
IN-
50:50:
V
CC
CML3.3V or CML2.5V
100: Differential T-Line
OUT+
OUT-
DS10BR150
IN+
IN-
100: Differential T-Line
LVDS
50:
Microstrip
L=4"
L=4"
L=4"
L=4"
CHARACTERIZATION
BOARD
DS10BR150
PATTERN
GENERATOR
OSCILLOSCOPE
50:
Microstrip
50:
Microstrip
50:
Microstrip
DS10BR150
www.ti.com SNLS252D –APRIL 2007–REVISED APRIL 2013
Figure 5. Jitter Measurements Test Circuit
DEVICE OPERATION
INPUT INTERFACING
The DS10BR150 accepts differential signals and allows simple AC or DC coupling. With a wide common mode
range, the DS10BR150 can be DC-coupled with all common differential drivers (i.e. LVPECL, LVDS, CML). The
following three figures illustrate typical DC-coupled interface to common differential drivers. Note that the
DS10BR150 inputs are internally terminated with a 100Ω resistor.
Figure 6. Typical LVDS Driver DC-Coupled Interface to DS10BR150 Input
Figure 7. Typical CML Driver DC-Coupled Interface to DS10BR150 Input
Copyright © 2007–2013, Texas Instruments Incorporated Submit Documentation Feedback 7
Product Folder Links: DS10BR150