Datasheet

DS100BR111
www.ti.com SNLS338E –JANUARY 2011–REVISED FEBRUARY 2013
Pin Descriptions
(1)
(continued)
Pin Name Pin Number I/O, Type Pin Description
MODE 18 I, LVCMOS Controls Device Mode of Operation
High = Continuous Talk
Float = 10G-KR Mode, Slow OOB
20KΩ = eSATA Mode, Fast OOB, Auto Low Power on 100 uS of inactivity. SD stays
active.
Low = SAS Mode, Fast OOB
Status Output
LOS 13 O, Open Indicates Loss of Signal (Default is LOS on INA). Can be modified via SMBus
Drain registers.
LOS Threshold Input
SD_TH 14 I, LVCMOS, The SD_TH pin controls LOS threshold setting;
Float Assert (mV), Deassert (mV)
(4-Levels) 20K = 160 mV, 100 mV
Float = 180 mV, 110 mV (Default)
High = 190 mV, 130 mV
Low = 210 mV, 150 mV
(4)
Power
VDD 21, 22 Power Power supply pins
2.5V mode connect to 2.5V
3.3V mode do not connect to any supply voltage. Should be used to attach external
decoupling to device, 100 - 200 nF recommended.
See Applications Information section for additional information.
VIN 15 Power VIN = 3.3V +/-10% (input to internal LDO regulator)
(5)
See Applications Information
section for additional information.
GND DAP Power Ground pad (DAP - die attach pad).
For additional information Table 1 Table 5 .
(4) Using values less than the default level can extend the time required to detect LOS and are not recommended.
(5) Must FLOAT for 2.5V operation.
Copyright © 2011–2013, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Links: DS100BR111