Datasheet

DS100BR111
SNLS338E –JANUARY 2011–REVISED FEBRUARY 2013 www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1)
Supply Voltage (VDD) -0.5V to +2.75V
Supply Voltage (VIN) -0.5V to +4.0V
LVCMOS Input/Output Voltage -0.5V to +4.0V
CML Input Voltage -0.5V to (VDD+0.5)
CML Input Current -30 to +30 mA
Junction Temperature 125°C
Storage Temperature -40°C to +125°C
ESD Rating HBM, STD - JESD22-A114F > 5 kV
MM, STD - JESD22-A115-A 100 V
CDM, STD - JESD22-C101-D 1250 V
Package Thermal Resistance θJC 3.2°C/W
θJA, No Airflow, 4 layer JEDEC 33.0°C/W
For soldering specifications: See product folder at www.national.com
www.national.com/ms/MS/MS-SOLDERING.pdf
(1) “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of
device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or
other conditions beyond those indicated in the Recommended Operating Conditions is not implied.
Recommended Operating Conditions
(1)
Min Typ Max Units
Supply Voltage (2.5V mode) 2.375 2.5 2.625 V
Supply Voltage (3.3V mode) 3.0 3.3 3.6 V
Ambient Temperature -40 25 +85 °C
SMBus (SDA, SCL) 3.6 V
(1) The Recommended Operating Conditions indicate conditions at which the device is functional and the device should not be operated
beyond such conditions. Absolute Maximum Numbers are guaranteed for a junction temperature range of -40°C to +125°C. Models are
validated to Maximum Operating Voltages only.
Electrical Characteristics
Parameter Test Conditions Min Typ Max Units
Power Supply Current
IDD Supply Current TX_DIS = LOW, EQ = ON 50 63
VOD_SEL = Float ( 1000 mV)
Auto Low Power Mode 12 15
TX_DIS = LOW, MODE = 20K mA
VID CHA and CHB = 0.0V
VOD_SEL = Float (1000 mV)
TX_DIS = HIGH (BR111) 25 35
LVCMOS DC Specifications
V
IH
High Level Input Voltage 2.0 VDD V
V
IL
Low Level Input Voltage GND 0.7 V
V
OH
High Level Output I
OH
= -4.0 mA
(1)
2.0 V
Voltage
V
OL
Low Level Output I
OL
= 4.0 mA 0.4 V
Voltage
(1) VOH only applies to the DONE# pin; LOS, SCL, and SDA are open-drain outputs that have no internal pull-up capability. DONE# is a
full LVCMOS output with pull-up and pull-down capability
6 Submit Documentation Feedback Copyright © 2011–2013, Texas Instruments Incorporated
Product Folder Links: DS100BR111