Datasheet

DRV8828PWP

DRV8829PWP

V3P3OUT

nRST

nSLP

nFAULT

DECAY

PHASE

ENABLE

GND

VREF

BOUT1

ISENSE

BOUT2

VCP

CP2

CP1

www.ti.com

Block Diagram

2.1 Power Connectors

The CPG006 offers access to the motor voltage (VM) power rail via terminal block J4. A set of test clips in

parallel with the terminal block allows for the monitoring of the input power rail.

The user must apply VM power according to the recommended product data sheet parameters. For the

DRV8828, the product data sheet is literature number SLVSA11. For the DRV8829, the product data

sheet is SLVSA74. Both documents are available for download through the TI website (www.ti.com).

NOTE: VDD for logic and microcontroller supply is derived from an onboard 3.3-V regulator stepped

down from the VM input voltage.

2.2 Test Stakes

Header connectors (100-mil, or 0.2,54-mm, pitch) provide access to all device signals. Both U2 and U3

have an identical structure; the respective header connectors follow the device pinout pattern, as shown in

Figure 2.

Figure 2. DRV882xEVM Pin Configuration

SLMU002–June 2011 DRV882x Evaluation Modules

Submit Documentation Feedback