Datasheet

Test Points
www.ti.com PCB
1.1 Test Points
Every pin on the DRV88xx device has been brought out to a test point, and labels on the silkscreen
identify each signal. These are Kelvin connections and are not meant to be used to drive high currents.
These can be used as a sense line.
For those pins that change functionality depending on the respective device being used, a table is
provided with corresponding function name on its particular column.
Figure 2. Test Points
5
SLVU574A–September 2011–Revised June 2012
Submit Documentation Feedback
Copyright © 2011–2012, Texas Instruments Incorporated