Datasheet

6.7 Pop/Click (Enable)
6.8 Pop/Click (Disable)
Enable
Output
100mV/div
0VInput
Output
2V/div
Enable
1VInput
2VOutput
DRV603EVM Performance www.ti.com
The characteristic performance for pop and click interference is shown with and without an input signal
applied, with a load of 2.5 k Ω . Measurement results are presented in a time domain format.
For Figure 16 , the power supply is applied, and then the shutdown signal is released. The shutdown signal
triggers the measuring system.
Figure 16. Pop/Click (Enable)
As with Section 6.7 , characteristic performance for pop and click interference is shown with and without an
input signal applied, with a load of 2.5 k Ω . Measurement results are again presented in a time domain
format.
Figure 17. Pop/Click (Disable)
DRV603EVM 14 SLOU252A – December 2008 – Revised January 2009
Submit Documentation Feedback