Datasheet

8.3 PCB Specification
Design Documentation www.ti.com
Table 10 summarizes the specifications for the evaluation board PCB.
Table 10. PCB Specifications
Board Identification A851-PCB-001(2.00)
Board type Double-sided plated-through board
Laminate type FR4
Laminate thickness 1,0 mm
Copper thickness 35 µ m (including plating exterior layers)
Copper plating of holes > 25 µ m
Minimum hole diameter 0,3 mm
Silkscreen, component side White; remove silkscreen from solder and
pre-tinned areas
Silkscreen, solder side None
Soldermask, component side Green
Soldermask, solder side Green
Protective coating Solder coating and chemical silver on free copper
Electrical test PCB must be electrically tested
Manufactured to PERFAG 2E (www.perfag.dk )
Aperture table PERFAG 10A (www.perfag.dk )
Board dimensions 60 mm x 60 mm
14 DRV602EVM2 SLOU248A – December 2008 – Revised January 2009
Submit Documentation Feedback