Datasheet

www.ti.com
2 Quick Setup Guide
2.1 Electrostatic Discharge Warning
2.2 Unpacking the EVM
Quick Setup Guide
This section describes the DRV601EVM2 board in regards to power supply and system interfaces. It
provides information regarding handling and unpacking, absolute operating conditions, and a description
of the factory default switch and jumper configuration.
The following is a step–by–step guide to configuring the DRV601EVM2 for device evaluation.
Many of the components on the DRV601EVM2 are susceptible to damage by electrostatic discharge
(ESD). Customers are advised to observe proper ESD handling precautions when unpacking and handling
the EVM, including the use of a grounded wrist strap at an approved ESD workstation.
CAUTION
Failure to observe ESD handling procedures may result in damage to EVM
components.
On opening the DRV601EVM2 package, ensure that the following items are included:
• 1 pc. DRV601EVM2 board with one DRV601RTJ
• 1 pc. PurePath Digital™ CD-ROM
If either of these items is missing, contact the Texas Instruments Product Information Center nearest you
to inquire about a replacement.
DRV601EVM2 4 SLOU217 – March 2008
Submit Documentation Feedback