Datasheet

www.ti.com

8.3 PCB Specifications

Design Documentation

Table 9. DRV601EVM2 Parts List (continued)

Qty Part Description Manufacture First Mfr P/N

Reference

4 STANDOFF1 M3x10 Aluminum Stand-off Ettinger 05.03.108

STANDOFF1

1 J10 2 pins / 1 row / 2,54mm Pitch Vertical Male Friction lock Pin Molex 22-27-2021

Header

4 J11 J12 J21 Horizontal Female w. Switch Coax Phono socket Chunfeng RJ843-4W

J22

2 J13 J14 3 pins / 1 row / 2,00mm Pitch Vertical Male Gold Shunt Header Harwin M22-2010305

Shunt Header

1 SW90 Switch DPDT PCB Mount Switch NKK-Nikkai G-22-AP

1 PCB11 A838-PCB-001(2.00) / DRV601EVM2 Printed Circuit Board (2.00) Printline A838-PCB-

001(2.00)

Table 10. PCB Specifications

Board identification A838-PCB-001(2.00)

Board type Double-sided plated-through board

Laminate type FR4

Laminate thickness 1,6 mm

Copper thickness 35 µ m (Include plating exterior layer)

Copper plating of holes > 25 µ m

Minimum hole diameter 0,3 mm

Silkscreen component side White—Remove silkscreen from solder area and pre-tinned areas

Silkscreen solder side None

Solder mask component side Green

Solder mask solder side Green

Protective coating Solder coating and chemical silver on free copper

Electrical tests PCB must be electrically tested

Manufactured to PERFAG 2E (www.perfag.dk )

Aperture table PERFAG 10A (www.perfag.dk )

Board size 60 mm × 50 mm

Comments See drill information file (A838-PCB-001 (DrillDrawing).pdf)

22 DRV601EVM2 SLOU217 – March 2008

Submit Documentation Feedback