Datasheet

www.ti.com
4 DRV600EVM Performance
DRV600EVM Performance
This section provides the general test specifications, the electrical data, audio performance data, and
physical specifications.
Table 3. General Test Specifications
(1)
GENERAL TEST SPECIFICATIONS NOTES/CONDITIONS
Supply Voltage 3.3V
Load Impedance 600 Ω
Input Signal 1kHz Sine
Measurement Filter AES17
(1)
These test conditions are used for all tests, unless otherwise specified.
Table 4. Electrical Data
(1)
ELECTRICAL DATA SPECIFICATIONS NOTES/CONDITIONS
Output Voltage, 600 Ω 2.1V
RMS
1kHz, unclipped (< 1% THD), T
A
= +25 ° C
Output Voltage, 600 Ω V
RMS
1kHz, 10% THD+N, T
A
= +25 ° C
Output Voltage, 100k Ω 2.15V
RMS
1kHz, unclipped (< 1% THD), T
A
= +25 ° C
Output Voltage, 100k Ω V
RMS
1kHz, 10% THD+N, T
A
= +25 ° C
Supply Current < 10mA 1kHz, 2mV
RMS
output voltage
Supply Current < 12mA 1kHz, 2V
RMS
output voltage
(1)
All electrical and audio specifications are typical values.
Table 5. Audio Performance Data
(1)
AUDIO PERFORMANCE SPECIFICATIONS NOTES/CONDITIONS
THD+N, 600 Ω 0.02V
RMS
< 0.02 % 1kHz
THD+N, 600 Ω 0.2V
RMS
< 0.05 % 1kHz
THD+N, 600 Ω 2V
RMS
< 0.08 % 1kHz
THD+N, 100k Ω 0.02V
RMS
< 0.10 % 1kHz
THD+N, 100k Ω 0.2V
RMS
< 0.13 % 1kHz
THD+N, 100k Ω 2V
RMS
< 0.02 % 1kHz
Dynamic Range > 109dB Ref: 2V
RMS
, A-weighted, AES17 filter
Noise Voltage < 7 μ V
RMS
A-weighted, AES17 filter
DC Offset < 5mV No signal, 600 Ω load
Channel Separation > 90dB 1kHz, 2V
RMS
Frequency Response: 20Hz to 20kHz +0.5/–0.5dB 2V
RMS
/600 Ω
(1)
All electrical and audio specifications are typical values.
Table 6. Physical Specifications
PHYSICAL SPECIFICATIONS NOTES/CONDITIONS
PCB Dimensions 50 x 60 x 25 Width x Length x Height (mm)
Total Weight 35g Components + PCB + Mechanics
6 DRV600EVM User's Guide SLOU205 – July 2007
Submit Documentation Feedback