User manual

Actuators

DRV2605

MSP430

OUT

USB

VBAT

SBW

MSP

DRV

USB Power

External

Power

Power Select Pins

DRV2605

Increment Mode

Decrement Mode ERM and LRA Actuators

Effect Buttons

Press to play haptic effects.

Programmer

Connector

AUDIO

Audio-to-

Haptics

JP4

JP3

Actuator Disconnect

Getting Started

www.ti.com

1 Getting Started

The DRV2605 can be used as a demonstration or evaluation tool. When the DRV2605EVM-CT is

powered on for the first time, a demo application automatically starts. To power the board, connect the

DRV2605EVM-CT to an available USB port on your computer using the included mini-USB cable. The

demo begins with a board power-up sequence, and then enters the demo effects mode. The four larger

buttons (B1 to B4) can be used to sample haptic effects using both the ERM and LRA motor in the top

right corner. The two smaller mode buttons (“–“ and “+”) are used to change between the different banks

of effects. See the DRV2605 Demonstration Program section for a more detailed description of the demo

application.

Figure 1. Board Diagram

DRV2605EVM-CT ERM and LRA Haptic Driver Evaluation Kit SLOU348B–January 2013–Revised March 2014

Submit Documentation Feedback