Datasheet

DP83849IF

www.ti.com

SNOSAX8D –JUNE 2009–REVISED APRIL 2013

Table 10-21. PHY Control Register (PHYCR), address 19h (continued)

Bit Bit Name Default Description

7 BP_STRETCH 0, RW Bypass LED Stretching:

This will bypass the LED stretching and the LEDs will reflect the internal value.

1 = Bypass LED stretching.

0 = Normal operation.

6 LED_CNFG[1] 0, RW LED Configuration

5 LED_CNFG[0] Strap, RW

LED_CNFG[1] LED_CNFG[0] Mode Description

Don't care 1 Mode 1

0 0 Mode 2

1 0 Mode 3

In Mode 1, LEDs are configured as follows:

LED_LINK = ON for Good Link, OFF for No Link

LED_SPEED = ON in 100 Mb/s, OFF in 10 Mb/s

LED_ACT/LED_COL = ON for Activity, OFF for No Activity

In Mode 2, LEDs are configured as follows:

LED_LINK = ON for good Link, BLINK for Activity

LED_SPEED = ON in 100 Mb/s, OFF in 10 Mb/s

LED_ACT/LED_COL = ON for Collision, OFF for No Collision

Full Duplex, OFF for Half Duplex

In Mode 3, LEDs are configured as follows:

LED_LINK = ON for Good Link, BLINK for Activity

LED_SPEED = ON in 100 Mb/s, OFF in 10 Mb/s

LED_ACT/LED_COL = ON for Full Duplex, OFF for Half Duplex

4:0 PHYADDR[4:0] Strap, RW PHY Address: PHY address for port.

Submit Documentation Feedback

Product Folder Links: DP83849IF