Datasheet

DP83849IF
www.ti.com SNOSAX8D –JUNE 2009–REVISED APRIL 2013
10.1 REGISTER DEFINITION
In the register definitions under the ‘Default’ heading, the following definitions hold true:
RW = Read Write access
SC = Register sets on event occurrence and Self-Clears when event ends
RW/SC = ReadWrite access/Self Clearing bit
RO = Read Only access
COR = Clear On Read
RO/COR = Read Only, Clear On Read
RO/P = Read Only, Permanently set to a default value
LL = Latched Low and held until read, based upon the occurrence of the corresponding event
LH = Latched High and held until read, based upon the occurrence of the corresponding event
Copyright © 2009–2013, Texas Instruments Incorporated Register Block 73
Submit Documentation Feedback
Product Folder Links: DP83849IF